| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
717H is the upgrade product of PY165H: 717H is standard 180 gearbox of hangteeth;The fuel tank inlet of the engine system is increased to increase the fuel sensor;The working control system adopts the integral instrument platform, and the casting joystick is equipped with a handle ball. Meanwhile, the transition plate is added to reduce the control force.Electrical system improvement;Hydraulic system to implement 24 ° taper double seal o-rings form.
1. Single handle electro-hydraulic control, with load shifting, the first six rear three gears, hands and feet and the throttle are independent and coordinated.
2, adopt efficient environmental protection on wood or east turbocharged engines, and Chang Lin transmission system perfect combination, proven, special emphasis on the strength of the parts on the design and safety coefficient, reliable in performance.
3, simple and reliable hydraulic manipulation, easily implement comprehensive regulation of various actions, such as: the shovel, tilt, rotation, front and side pendulum scarification, has a dual role of drift of check valve.
Parameters:
|
Basic specification |
|
|---|---|
| Engine model | 6BT5.9 |
| Rated power/speed | 100/2200kw/rpm |
| Dimension(LxWxH) | 8015×2380×3050mm |
| Operating weight(Standard) | 11000kg |
|
Performance specification |
|
| Travelling speed ,forward | 5,8,13,20,30,42km/h |
| Travelling speed ,reverse | 5,13,30km/h |
| Tractive force(f=0.75) | 61.3KN |
| Max. gradeability | 20% |
| Tire inflation pressure | 300kPa |
| Working hydraulic pressure | 16MPa |
| Transmission pressure | 1.3~1.8MPa |
|
Operating specification |
|
| Max. steering angle of front wheels | ±49° |
| Max. lean angle of front wheels | ±17° |
| Max. oscillation angle of front axle | ±15° |
| Max. oscillation angle of balance box | 16 |
| Frame articulation angle | ±27° |
| Min. turning radius using articulation | 6.6m |
|
Biade |
|
| Maximum lift above ground | 410mm |
| Maximum depth of cutting | 535mm |
| Maximum blade position angle | 90° |
| Blade cutting angle | 28°-70° |
| Circle reversing rotation | 360° |
| Moldboard width X height | 3710×610mm |
){kind=link}