| After-sales Service: | Accessories and Maintenance Support |
|---|---|
| Warranty: | 1 Year |
| Certification: | ISO9001 |
| Condition: | New |
| Maximum Lifting Height: | 10-15m |
| Maximum Lifting Weight: | >16t |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Truck crane has four-section boom of high strength steel structure and optimized U-shaped cross section with max.lifting capacity of 25t, full-extended boom length of 33.5m, max.lifting height including jib of 42m, reduce weight and improve safety significantly.
Jib mounting angles are 0°, 15°, and 30°, which ensure fast and convenient change-over between different operating conditions so as to improve working efficiency of the machine.
Efficient & Unique Hydraulic System
Triple gear pump, load feedback and constant power control are applied to provide strong lifting capacity and good micro-mobility. Unique steering buffer design guarantees smooth braking operation.
Intelligent Electronic Control
Self-developed controller SYMC special for engineering machinery is configured. The adoption of CAN-bus full-digital network control technology ensures stable control signal, simple harness, and high reliability. Timely feedback of data information can achieve the monitoring of the overall working status in real time.
The Load Moment Limiter
Equipped with the comprehensive intelligent protection system is used with accuracy within 3%. The adoption of comprehensive logic and interlock control system ensures more safe and reliable operation.
More Safe Devices
Main and auxiliary winches are equipped with over roll-out limiter to prevent over rolling-out of wire rope.
Boom and jib ends are equipped with height limiters respectively to prevent over-hoisting of wire rope.
Hydraulic system is configured with the balance valve, overflow valve and two-way hydraulic lock etc., to ensure stable and reliable operation.
| Classificatory | Item | Unit | Parameter | |
|---|---|---|---|---|
| Engine | Model | D6114 | ||
| Outline dimension | Overall length | mm | 11990 | |
| Overall width | mm | 2500 | ||
| Overall height | mm | 3350 | ||
| Wheel base | Axle 1, Axle 2 | mm | 4025 | |
| Axle 2, Axle 3 | mm | 1350 | ||
| Mass | Total mass in travel state | kg | 22900 | |
| Axle 1 | kg | 5240 | ||
| Axle load | Axle 2 | kg | 17660 | |
| Travel performance | Travel speed | Max. travel speed | km/h | 70 |
| Min. stable travel speed | km/h | 4 | ||
| Turning diameter | Min. turning diameter | m | 20 | |
| Min. turning diameter at boom tip | m | 23 | ||
| Min. ground clearance | mm | 270 | ||
| Approach angle | (°) | 21 | ||
| Departure angle | (°) | 10 | ||
| Braking distance (at 30km/h with full load) | m | 9.5 | ||
| Max. grade-ability | % | 24 | ||
| Fuel consumption for 100km | L | 35 | ||
| Power | Engine rated output | kW/(r/min) | 158/2200 | |
| Engine rated torque | N.m/ (r/min) | 790/1400 | ||
| Engine rated speed | r/min | 2200 | ||
| Classificatory | Item | Unit | Parameter | |||
|---|---|---|---|---|---|---|
| Lifting performance | Max. total rated lifting capacity | t | 16 | |||
| Min. rated working radius | m | 3 | ||||
| Turning radius at turntable tail | m | ≤3.12 | ||||
| Max. load moment | Base boom | kN.m | 711 | |||
| Fully extended boom | kN.m | 449 | ||||
| Fully extended boom + Jib | kN.m | 186 | ||||
| Outrigger span | Longitudinal | m | 4.6 | |||
| Lateral | m | 5.4 | ||||
| Lifting height | Base boom | m | ≥9.9 | |||
| Fully extended boom | m | ≥23.6 | ||||
| Fully extended boom + Jib | m | ≥30.8 | ||||
| Boom raising time | s | ≤60 | ||||
| Working speed | Boom full extension time | s | ≤75 | |||
| Max. swing speed | r/min | ≥2.5 | ||||
| Hoist speed | Main winch | Full load | m/min | ≥54 | ||
| (single line) | No load | m/min | ≥100 | |||
| Aux. winch | Full load | m/min | ≥54 | |||
| No load | m/min | ≥100 | ||||
| Noise limit | Crane exterior noise | dB (A) | ≤118 | |||
| At seated position | dB (A) | ≤90 | ||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}