Factory price LIUGONG 230HP construction machinery motor grader front blade grader CLG4230
Product descreption
New appearance design.
The articulation frame is adopted and matched with the steering of the front wheel, With small turning radius, maneuvering and flexible.
The electro-hydraulic controls the power shift gearbox, with 6ahead gears and 3 back gears.
The international matching hydraulic parts are adopted, with reliable operation.
The motions of the blade are fully hydraulically controlled.
The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential mechanism.
The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable, with convenient application, and the comfort of driving is improved.
The cab is grand and nice, with wide eyeshot and good sealing.
The front bulldozing plate, rear scarification device, front scarification harrow and automatic leveling device can be added.
Parameters
| Engine |
|
DCEC 6CTA8.3-C230 |
| Rated Power |
(kW) |
172(230)@2200 |
| Blade Width |
mm(inches) |
4270(168) |
| Maximum Speed |
km/h (mph) |
41.5 (25.8) |
| Draw Bar Pull |
(kN) |
90 |
| Operating Weight |
kg(Lb) |
16500(36376) |
| ENGINE |
| Tier |
|
II |
| Make |
|
Dongfeng |
| Gross Power |
kW(Hp)@rpm |
172(230)@2200 |
| Net Power |
kW(Hp)@rpm |
155(208)@2200 |
| Peak Torque |
|
2 |
| Torque Rise % |
|
34% |
| Number of Cylinders |
|
6 |
| Aspiration |
|
turbocharged |
| TRANSMISSION |
| Transmission Type |
|
power shift |
| Transmission Configuration |
|
6f/3r |
| Torque Converter |
|
three-member single turbine |
| Maximum Travel Speed, fwd |
(km/h) |
41.5 (25.8) |
| Maximum Travel Speed, rev |
(km/h) |
25.6 (15.9) |
| Number of Speeds, fwd |
|
6 |
| Number of Speeds, rev |
|
3 |
| AXLES |
| Front Axle Make |
|
LiuGong Weld axle |
| Rear Axle Make |
|
Meritor |
| Differential Type |
|
No-spin limited slip standard |
| Final Drive Type |
|
chain drive |
| Axle Oscillation |
|
±15° |
| Front Axle Type |
|
all welded steel frame |
| Front Axle, Wheel Lean Angle |
|
±17° |
| STEERING |
| Steering Configuration |
|
load sensor steering gear |
| Steering Relief Pressure |
(Mpa) |
17 |
| Minimum Turning Radius |
(inches) |
8000(315) |
| Steering Angle |
|
±45° |
| Frame Articulation Angle |
|
±20° |
| BRAKES |
| Service Brake Type |
|
(Dry)shoe |
| Service Brake Location |
|
rear axle only |
| Service Brake Actuation |
|
hydraumatic |
| TIRES |
| Tire Size |
|
17.5-25 PR12/L3 |
| HYDRAULIC SYSTEM |
| Main Pump Type |
|
gear |
| Main Relief Pressure |
(Mpa) |
18 |
| Pilot Pump Flow |
L(Gal)/min |
126(33) |
| WORKING CAPACITIES |
| Maximum Draw Pull |
(kN) |
90 |
| Cutting Pressure |
kg(Lb) |
8100(17857) |
| TANDEM DRIVE PERFORMANCE |
| Height |
mm(inches) |
600(24) |
| Width |
mm(inches) |
210(8) |
| Thickness, inner wall / outer wall |
mm(inches) |
20/20(0.8/(0.8) |
| Center Distance |
mm(inches) |
1538(61) |
| Oscillating Angle |
|
±15° |
| MOLDBOARD PERFORMANCE |
| Bank Cut Angle |
|
40~70 |
| Moldboard Lift Above Ground |
mm(inches) |
405(16) |
| Moldboard Side Shift, right / left |
mm(inches) |
725/675(29/27) |
| Maximum Sloping Angle |
|
90° |
| Cutting Depth |
mm(inches) |
600(24) |
| Circle Rotation |
|
360° |
| Circle Diameter |
mm(inches) |
1455(57) |
| Circle Thickness |
mm(inches) |
140(6) |
| DIMENSIONS |
| Wheelbase |
mm(inches) |
6230(245) |
| Overall Length |
mm(inches) |
8971(353) |
| Overall Height with Cab |
|
3438(135) |
| Overall Width |
mm(inches) |
2600(102) |
| Clearance under Front Axle |
mm(inches) |
645(25) |
| Moldboard Standard Length |
mm(inches) |
4270(168) |
| Moldboard Standard Thickness |
mm(inches) |
19(0.7) |
| Moldboard Standard Height |
mm(inches) |
650(24) |
| OPERATING WEIGHTS |
| Operating Weight |
kg(Lb) |
16500(36376) |
| On Front Wheels |
kg(Lb) |
4700(10362) |
| On Rear Wheels |
kg(Lb) |
11800(26015) |
| SERVICE CAPACITIES |
| Fuel Tank |
L(Gal) |
230(61) |
| Engine Oil |
L(Gal) |
22(6) |
| Cooling System |
L(Gal) |
45(12) |
| Hydraulic Reservoir |
L(Gal) |
186(49) |
| Transmission And Torque Converter |
L(Gal) |
45(12) |
| Tandems, Each |
L(Gal) |
28(7) |
Pictures
Audited Supplier 
){kind=link}
){kind=link}