135HP Grader Gr135 Construction Equipment Motor Grader

• After-sales Service: Online Support
• Warranty: One-Year Warranty
• Certification: TUV, ISO, RoHS, CE
• Condition: New
• Application: Railway, Mine, Farmland, Highway
• Transmission: Hydraulic
• Model NO.: GR135
• Walking Mode: Wheeled
• Type: Small Grader
• Rated Power: 100kw
• Operating Weight: 11200kg
• Tire Inflation Pressure: 300kpa
• Maximum Depth of Cutting: 515mm
• Transport Package: Nude
• Specification: 8971*2600*3438mm
• Trademark: newindu
• Origin: China
• HS Code: 84292090
• Production Capacity: 100

Product Description

135HP Grader GR135 Construction Equipment Motor Grader 


Product description
The GR135 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm- lands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

1. GR135 adopt Dongfeng cummins 6BT5.9-C130-II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption.

2. Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmis- sion box has six forward gears, three backward gears, with neutral start protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions.

3. The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential.

4. The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the
articulated frame, which can further reduce the turning radius.

5. The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the
maintainability.

Technical parameter

Basic specification
Engine model	6BT5.9
Rated power/speed	100/2200kw/rpm
Dimension(LxWxH)	8015×2380×3050mm
Operating weight(Standard)	11200kg
Performance specification
Travelling speed ,forward	5,8,13,20,30,42km/h
Travelling speed ,reverse	5,13,30km/h
Tractive force(f=0.75)	61.3KN
Max. gradeability	30%
Tire inflation pressure	300kPa
Working hydraulic pressure	16MPa
Transmission pressure	1.3~1.8MPa
Operating specification
Max. steering angle of front wheels	±49°
Max. lean angle of front wheels	±17°
Max. oscillation angle of front axle	±15°
Max. oscillation angle of balance box	16
Frame articulation angle	±27°
Min. turning radius using articulation	6.6m
Biade
Maximum lift above ground	410mm
Maximum depth of cutting	515mm
Maximum blade position angle	90°
Blade cutting angle	54°-90°
Circle reversing rotation	360°
Moldboard width X height	3710×610mm

Product image






Company information