| After-sales Service: | Provide |
|---|---|
| Warranty: | 1 Year |
| Cab Location: | Adjustable |
| Type: | Diesel Forklift |
| Power: | Diesel Engine |
| Load Capacity: | 5T - 10T |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 8ton/10ton Diesel Forklift CPCD80 CPCD100 Mexico
Environmental Friendly
- High efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device are use to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving , increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.
Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure the safety.
- Parking brake with safety protection device, when parking brake is working, the forklift will not move even the direction lever is turned.
- Safety device in mast hydraulic system prevents material falling down in of hose broken.
- High pressure hose is designed far away from the driver.
- Safety wire harness, using waterproof plug.
|
Model
|
|
CPCD80
|
|
Power Type
|
|
Diesel
|
|
Rated Capacity
|
kg
|
8000
|
|
Load center
|
mm
|
600
|
|
Size
|
||
|
Max. lift height of mast with Load-backrest
|
mm
|
4380
|
|
Max. lift height of fork (standard)
|
mm
|
3000
|
|
Height of mast (standard)
|
mm
|
2500
|
|
Free lift height (standard)
|
mm
|
205
|
|
Height of Load-backrest
|
mm
|
1372
|
|
Distance from seat to overhead guard
|
mm
|
1045
|
|
Overhead Guard Height
|
mm
|
2450
|
|
Front overhang
|
mm
|
590
|
|
Rear overhang
|
mm
|
760
|
|
Wheel base
|
mm
|
2250
|
|
The height of traction pin
|
mm
|
395
|
|
Min. ground clearance
|
mm
|
200
|
|
The distance between forks
|
mm
|
1840/300
|
|
Tread (front/rear)
|
mm
|
1470/1700
|
|
Min. Turning radius (outside)
|
mm
|
3370
|
|
Min. Turning radius (inside)
|
mm
|
210
|
|
Mast tilt angle
|
deg
|
6/12
|
|
Fork size
|
mm
|
1220x150x75
|
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}